Six pin connector
Electrical Connectors
The towing vehicle will need to be outfitted with the proper electrical connector to operate the trailer lights, interior 12 volt lights, and trailer brakes (if so equipped). The 6 prong jack is for trailers without brakes, and the 7 prong jack is for trailers equipped with electric brakes. The wire color legend below indicates the wire colors used for the Scamp wiring harness.
Six pin connector
Seven pin connector
Green (TM) - Tail Lights and Marker Lights
Red (LT)- Left Turn and Brake Light
Brown (RT) – Right turn and Brake Light
Black (S) – Interior 12 volt lights and Accessories
White (GD) – Ground
Yellow (A) – Brake Lights (Foreign Stop) or Backup Lights
Blue (Large connector only) – Electric Brakes
Notes on Electrical Diagram
(on page 15)
1. Because Scamp builds trailers to meet the desires of the customer, very few trailers are constructed in the same way. Thus, the wiring diagram may not specifically represent your trailer. It shows how appliances are connected, which lines are fused, and how lights are connected to the power supply. Use this diagram only as a reference.